History of the 928 model line (1977-1995)

Between 1948 and 1976, Porsche exclusively produced sports cars with rear-mounted, air-cooled engines. The best example of this design philosophy was the seemingly indomitable 911. However, at the beginning of the 1970s, the company decided to move away from this focus, which it already considered outdated, and concentrated on a new generation of automobiles with front-mounted, liquid-cooled engines.

928_01_ep.jpg (800x600) - 129 KB

In 1976, the 924 coupe was introduced as the first of these, immediately gaining significant popularity. It was followed in 1977 by the prestigious 928 model. This was powered by the company's own engine, its first V8. Since nothing was to be carried over from previous models to the new car, the development of the 928 stretched over more than six years.

928_02_ep.jpg (800x600) - 124 KB

Work on it began as early as 1971, even before work on the 924 started, which was not the usual procedure. Given the constantly tightening emission regulations in the American market, which was the most important market for Porsche, the company decided on a V8 engine, which could also—unlike the 911—be adapted for use with an automatic transmission, another requirement of the market across the Atlantic. Another point that needed to be addressed was the need to constantly increase ride comfort and the level of sophistication. The result was a front-engine layout with the transmission mounted at the rear in a transaxle configuration for better balance.

928_03_ep.jpg (800x600) - 78 KB

The 4.5-liter OHC V8 engine produced 179 kW and was separated from the five-speed transmission by a torque tube, inside which the driveshaft was unusually supported by five bearings. All wheels were independently suspended, with a double-wishbone axle with coil springs at the front, while the rear utilized a design Porsche called the Weissach axle, named after the company's research and development center. This setup was used to prevent the car from losing stability if the driver of a 928 were to unexpectedly lift off the throttle while cornering.

928_04_ep.jpg (800x600) - 83 KB

The powertrain and chassis components were hidden under a 2+2 coupe body with a large rear hatch. A substantial part of the body shell (specifically the front fenders, doors, and hood) was made of aluminum, while the remaining parts were made of sheet steel. Another novelty concerned the bumpers, which the car seemingly did not have. In reality, they were integrated under the front and rear panels made of easily deformable plastic in the same color as the body. In the event of an accident, they would return to their original position after an impact.

928_05_ep.jpg (800x600) - 88 KB

This technically sophisticated package was presented to the public at the 1977 Geneva Motor Show. It was greeted with much acclaim, the most significant of which was winning the "1978 European Car of the Year" award. The car reached a speed of 230 km/h. However, the 8 seconds it needed to accelerate from 0 to 96 km/h with the 3-speed automatic transmission did not reach the level of the well-established 911, which only confirmed the opinion that the new car did not reach the excellent level of its famous rear-engined contemporary.

928_06_ep.jpg (800x600) - 87 KB

These shortcomings were to some extent addressed in the 928 S model, which appeared in mid-1979, featuring a 4.7-liter engine with a larger bore. This car was capable of speeds up to 250 km/h. In 1985, 928 models intended for the American market were supplied with an enlarged 5.0-liter V8 engine with a 4-valve-per-cylinder DOHC valvetrain, producing 215 kW. For 1987, this powertrain, with power further increased to 235 kW, was used in the 928 S-4. This model featured an aerodynamically improved front end.

928_07_ep.jpg (800x600) - 78 KB

In 1989, the GT version followed with a 246 kW engine, featuring stiffer suspension and wider tires. The stated top speed was 274 km/h, making it the fastest mass-produced Porsche at the time. It was available only with a manual transmission. It is a paradox that with the change in the company's mindset, this car was not considered by the public as a 928, but rather as a version of the 911, with which Porsche connects its future both then and now.

In 1992, the top-of-the-line 928 GTS version followed with a 345 hp engine, stiffer suspension, and wider tires. Nevertheless, this very well-engineered car remained in production until 1995 as one of the most sophisticated European GT cars.

Version Overview:

1977 928 Coupe 4.5L V8
Displacement: 4474 cc
Engine Power: 179 kW (240 HP) at 5500 rpm
Torque: 350 Nm at 3600 rpm
Top Speed: 230 km/h
Acceleration (0-100 km/h): 6.8 s
1979 928 S Coupe 4.7L V8
Displacement: 4664 cc
Engine Power: 221 kW (295 HP) at 5900 rpm
Torque: 385 Nm at 4500 rpm
Top Speed: 250 km/h
Acceleration (0-100 km/h): 6.6 s
1987 928 S4 Coupe 5.0L V8
Displacement: 4957 cc
Engine Power: 235 kW (320 HP) at 6000 rpm
Torque: 430 Nm at 3000 rpm
Top Speed: 270 km/h
Acceleration (0-100 km/h): 5.9 s
1989 928 GT Coupe 5.0L V8
Displacement: 4957 cc
Engine Power: 246 kW (330 HP) at 6200 rpm
Torque: 430 Nm at 4100 rpm
Top Speed: 275 km/h
Acceleration (0-100 km/h): 5.6 s
1992 928 GTS Coupe 5.4L V8
Displacement: 5397 cc
Engine Power: 257 kW (345 HP) at 5700 rpm
Torque: 500 Nm at 4250 rpm
Top Speed: 275 km/h
Acceleration (0-100 km/h): 5.2 s

History of the 924 model line (1976 - 1988) History of the 356 model line (1948-1965)


Share:
Share on Facebook Share on Twitter Share on LinkedIn Share via WhatsApp

Did you like the article?
👎 Dislike 0
Devilstorm
28.4. 2004

← Back to History

Discussion (0)

Add a comment



 (Commenting rules)